Photos

Clear Filters | 1 - 20 of 9801 results

Dyess AFB inspires the next generation

U.S. Air Force Senior Airman Channing Hoyt, 7th Logistics Readiness Squadron individual protective equipment journeyman, hands a helmet to a student during a career fair at Dyess Air Force Base, Texas, Feb. 26, 2026. The event invited students from the local area onto the installation to learn about career opportunities available in the Air Force. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download

Dyess AFB inspires the next generation

U.S. Air Force Staff Sgt. Steven Morales, 7th Civil Engineer Squadron heavy equipment supervisor, explains equipment and tools on display to students during a career fair at Dyess Air Force Base, Texas, Feb. 26, 2026. Morales provided insight into the skills and responsibilities required to maintain and repair base infrastructure. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download

Dyess AFB inspires the next generation

A U.S. Airman assigned to the 317th Airlift Wing showcases C-130J Super Hercules landing gear to students during a career fair at Dyess Air Force Base, Texas, Feb. 26, 2026. The students received hands-on experience while learning about the aircraft’s components, operations and mission sets. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download

Dyess AFB inspires the next generation

U.S. Air Force Senior Airman Donovan Callaghan, 7th Logistics Readiness Squadron individual protective equipment technician, stands with a student trying on body armor and chemical protective gear during a career fair at Dyess Air Force Base, Texas, Feb. 26, 2026. The event invited students from the local area on to the installation to learn about career opportunities available in the Air Force. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download

Dyess AFB inspires the next generation

A U.S. Airman assigned to the 7th Security Forces Squadron demonstrates the red man full body protective suit to safely simulate realistic combat scenarios with a student during a career fair at Dyess Air Force Base, Texas, Feb. 26, 2026. Students participated in demonstrations and viewed exhibits from 38 career fields during the event. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download

7th Munitions Squadron sharpens their edge

U.S. Airmen assigned to the 7th Munitions Squadron load a Joint Air-to-Surface Standoff Missile at Dyess Air Force Base, Texas, Feb. 14, 2026. Launcher Load Frames were used for the first time during the JASSM loadout, providing 7th MUNS Airmen with valuable experience to improve configuration times on the flightline. (U.S. Air Force photo by Airman 1st Class Caleb Schellenberg)
Details Download

7th Munitions Squadron sharpens their edge

U.S. Air Force Staff Sgt. Heriberto Perez, 7th Munitions Squadron armament maintenance supervisor, left, and Airman 1st Class Maya Roberto, 7th MUNS armament maintenance member, prepare to position a Joint Air-to-Surface Standoff Missile to be loaded onto a B-1B Lancer at Dyess Air Force Base, Texas, Feb. 14, 2026. The JASSM weapon system enables the Air Force to strike targets from extended ranges, strengthening deterrence and global strike capabilities. (U.S. Air Force photo by Airman 1st Class Caleb Schellenberg)
Details Download

7th Munitions Squadron sharpens their edge

U.S. Air Force Senior Airman Steven Hoyer, 7th Munitions Squadron armament maintenance member, conducts the process of loading a Joint Air-to-Surface Standoff Missile at Dyess Air Force Base, Texas, Feb. 14, 2026. Launcher Load Frames were used for the first time during the JASSM loadout, providing 7th MUNS Airmen valuable experience to improve configuration times on the flightline. (U.S. Air Force photo by Airman 1st Class Caleb Schellenberg)
Details Download

7th Munitions Squadron sharpens their edge

U.S. Air Force Staff Sgt. Heriberto Perez, 7th Munitions Squadron armament maintenance supervisor, left, and Airman 1st Class Maya Roberto, 7th MUNS armament maintenance member, position a Joint Air-to-Surface Standoff Missile to be loaded onto a B-1B Lancer using a Launcher Load Frame at Dyess Air Force Base, Texas, Feb. 14, 2026. From controlled storage to final aircraft loading, munitions Airmen ensure each weapon meets strict standards that enable the Air Force’s ability to deliver precision strike capabilities. (U.S. Air Force photo by Airman 1st Class Caleb Schellenberg)
Details Download

7th Munitions Squadron sharpens their edge

U.S. Air Force Staff Sgt. Heriberto Perez, (left), 7th Munitions Squadron armament maintenance supervisor, and Senior Airman Steven Hoyer, 7th MUNS armament maintenance member, load a Joint Air-to-Surface Standoff Missile at Dyess Air Force Base, Texas, Feb. 14, 2026. JASSM is a 2,000 pound-class precision cruise missile capable of striking targets from extended ranges outside of enemy air defenses. (U.S. Air Force photo by Airman 1st Class Caleb Schellenberg)
Details Download

7th Munitions Squadron sharpens their edge

U.S. Air Force Airman 1st Class Maya Roberto, 7th Munitions Squadron armament maintenance member, moves a Launcher Load Frame with a Joint Air-to-Surface Standoff Missile to be loaded onto a B-1B Lancer at Dyess Air Force Base, Texas, Feb. 14, 2026. Integrated across platforms such as the B-1B Lancer, B-52H Stratofortress and F-15E Strike Eagle, JASSM employment relies on coordination between multiple units to synchronize build-up, delivery and load operations under tight timelines. (U.S. Air Force photo by Airman 1st Class Caleb Schellenberg)
Details Download

7th Munitions Squadron sharpens their edge

U.S. Airmen assigned to the 7th Munitions Squadron prepare to load a Joint Air-to-Surface Standoff Missile using a Launcher Load Frame at Dyess Air Force Base, Texas, Feb. 14, 2026. Launcher Load Frames were used for the first time at Dyess on this JASSM loadout, providing 7th MUNS Airmen with valuable experience to improve configuration times on the flightline. (U.S. Air Force photo by Airman 1st Class Caleb Schellenberg)
Details Download

Col. Paul D. Julian Jr.

Col. Paul D. Julian Jr.
Details Download

Chief Master Sgt. Sean Scavetta

Chief Master Sgt. Sean Scavetta
Details Download

21 ATF/CD Bio

21 ATF/CD Bio
Details Download

7 EMS performs first on-aircraft cold spray repair on B-1B Lancer

Ryan Kayton, Engineering and Software System Solutions, Inc. mechanical technician, uses cold spray equipment to restore metal on a B-1B Lancer at Dyess Air Force Base, Texas, Feb. 20, 2026. The repair marked the first on-aircraft application of the technique at Dyess. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download

7 EMS performs first on-aircraft cold spray repair on B-1B Lancer

Marc Gilbert, Engineering and Software System Solutions, Inc. mechanical technician, left, and Ryan Kayton, ES3 mechanical technician, right, move equipment to begin a cold spray repair at Dyess Air Force Base, Texas, Feb. 20, 2026. The repair marked the first time the technique was performed at Dyess while the component remained installed on a B-1B Lancer. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download

7 EMS performs first on-aircraft cold spray repair on B-1B Lancer

Marc Gilbert, Engineering and Software System Solutions, Inc. mechanical technician, powers up cold spray equipment at Dyess Air Force Base, Texas, Feb. 20, 2026. The cold spray process restores metal surfaces by bonding accelerator powder particles to the damaged area. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download

7 EMS performs first on-aircraft cold spray repair on B-1B Lancer

Kaleb Reyna, Engineering and Software System Solutions, Inc. mechanical engineer, connects power to cold spray equipment at Dyess Air Force Base, Texas, Feb. 20, 2026. The cold spray system applies a metal coating to restore damaged aircraft and ground support equipment components without melting or weakening the original material. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download

7 EMS performs first on-aircraft cold spray repair on B-1B Lancer

U.S. Air Force Airman 1st Class Andrew Tanksley, 7th Equipment Maintenance Squadron aircraft structural maintenance apprentice, moves a helium tank in support of a cold spray repair at Dyess Air Force Base, Texas, Feb. 20, 2026. The helium was used to accelerate aluminum powder particles bonding with a metal surface during the structural repair of a B-1B Lancer component. (U.S. Air Force photo by Airman 1st Class William Neal)
Details Download